-
Nacam Cpns and
FiftyEight are now friends 8 years, 8 months ago -
FiftyEight posted a new activity comment 8 years, 8 months ago
It took you 8 months to remember the name? HAHAHA
-
FiftyEight commented on the post, Gunpla TV – Massive Episode 150! – Kshatriya Repaired – Win stuff! 8 years, 9 months ago
Congrats on the 150th episode! The reboot segment wasn’t that bad. I like the transitions with you guys walking across the aisles though. For the next PG, I was expecting to see the Unicorn, but it wasn’t […]
-
FiftyEight posted a new activity comment 9 years, 4 months ago
Thanks for your input. You might just inspire me to build the 1/100 wing. haha.
-
FiftyEight posted a new activity comment 9 years, 4 months ago
Also, did you use plastic cement or any kind of putty to remove the seam lines? It looks really clean.
-
Nope no stickers or decals, and the most I did with the seam lines was using the back of the xacto blade, didn’t know you could make them disappear with some glue on the seam and some sand paper, until the kit was all painted up and together.
-
Thanks for your input. You might just inspire me to build the 1/100 wing. haha.
-
-
-
FiftyEight posted a new activity comment 9 years, 4 months ago
Your kit looks really sharp. Did you use any sticker at all?
-
Also, did you use plastic cement or any kind of putty to remove the seam lines? It looks really clean.
-
Nope no stickers or decals, and the most I did with the seam lines was using the back of the xacto blade, didn’t know you could make them disappear with some glue on the seam and some sand paper, until the kit was all painted up and together.
-
Thanks for your input. You might just inspire me to build the 1/100 wing. haha.
-
-
-
-
FiftyEight posted a new activity comment 9 years, 4 months ago
well DERP! haha of course. Thing is I have to paint with gundam markers. Probably I have to invest in some spray paints.
-
FiftyEight posted a new activity comment 9 years, 4 months ago
Did you have to paint a lot? From what I see from the plastic in the box, it’s really similar to the old NG wing kits, you pretty much have to paint everything to match the box color. Anyway, thank you for your input on this.
-
I painted the entire model, naturally. To do less is a waste of a kit. 🙂
-
well DERP! haha of course. Thing is I have to paint with gundam markers. Probably I have to invest in some spray paints.
-
-
It’s not too bad on panel lines, I was informed about seam lines and I watched a brief video on removing them after I did most of the paint, which I will try out on the next kit. If you’re not painting the kit, then glue and sanding is going to be required, slightly big step between front and back around the collar area, most of it fits together…[Read more]
-
Only reason I repainted the gold is due to the wings needing that diamond section to match up.
-
Your kit looks really sharp. Did you use any sticker at all?
-
Also, did you use plastic cement or any kind of putty to remove the seam lines? It looks really clean.
-
Nope no stickers or decals, and the most I did with the seam lines was using the back of the xacto blade, didn’t know you could make them disappear with some glue on the seam and some sand paper, until the kit was all painted up and together.
-
Thanks for your input. You might just inspire me to build the 1/100 wing. haha.
-
-
-
-
-
-
-
FiftyEight posted a new activity comment 9 years, 4 months ago
Oh yeah, I saw you were airbrushing the 1/100 Wing. First of all, good job on that. And thanks for the input. I’ve seen videos saying that the panel lines on the older Wing 1/100 kits are too much. Besides what you said, does it have bad seam lines? I’ve built the 1/144 NG Wing and the parts were not molded that good, so pieces are lined up…[Read more]
-
FiftyEight posted a new activity comment 9 years, 4 months ago
Pretty much just the original colors painted with gundam markers. I don’t think I can do anything else beside that.
-
FiftyEight posted an update in the group
Beginner Modeler – Modeling Competition 2013. 9 years, 4 months agoHey guys, I’m thinking of building another kit for the competition, but I couldn’t decide on which on these wings should I build. Anybody got any experience with these kits? Opinion and ideas are very welcomed.
-
I have not. What are you looking to do with these kits? If you’re going to detail them up like crazy, mght be a good choice.
-
Pretty much just the original colors painted with gundam markers. I don’t think I can do anything else beside that.
-
-
Just finished building Wing Gundam HG for this, surprising amount of panel lining on the shield, buster rifle is too heavy for the hand to support it when trying to hold the gun level, and the wings are heavy, so Wing has to lean forward a little, or the wings have to be put in the flight mode. Haven’t built Wing 0 yet, so I don’t know how it…[Read more]
-
Oh yeah, I saw you were airbrushing the 1/100 Wing. First of all, good job on that. And thanks for the input. I’ve seen videos saying that the panel lines on the older Wing 1/100 kits are too much. Besides what you said, does it have bad seam lines? I’ve built the 1/144 NG Wing and the parts were not molded that good, so pieces are lined up…[Read more]
-
-
I built the HG (1:144) WZC. The old 1:144 EW line is pretty nice IMO, but there are a few rough edges – like the antenna and main camera housing are a bit chunky, and I think the sculpt of the feathers on the wings is a but crude. But all the same I think it’s the best representation of the WZC wings in plastic kit form – without the hinge blocks…[Read more]
-
Did you have to paint a lot? From what I see from the plastic in the box, it’s really similar to the old NG wing kits, you pretty much have to paint everything to match the box color. Anyway, thank you for your input on this.
-
I painted the entire model, naturally. To do less is a waste of a kit. 🙂
-
well DERP! haha of course. Thing is I have to paint with gundam markers. Probably I have to invest in some spray paints.
-
-
It’s not too bad on panel lines, I was informed about seam lines and I watched a brief video on removing them after I did most of the paint, which I will try out on the next kit. If you’re not painting the kit, then glue and sanding is going to be required, slightly big step between front and back around the collar area, most of it fits together…[Read more]
-
Only reason I repainted the gold is due to the wings needing that diamond section to match up.
-
Your kit looks really sharp. Did you use any sticker at all?
-
Also, did you use plastic cement or any kind of putty to remove the seam lines? It looks really clean.
-
Nope no stickers or decals, and the most I did with the seam lines was using the back of the xacto blade, didn’t know you could make them disappear with some glue on the seam and some sand paper, until the kit was all painted up and together.
-
Thanks for your input. You might just inspire me to build the 1/100 wing. haha.
-
-
-
-
-
-
-
-
-
FiftyEight posted an update in the group
Beginner Modeler – Modeling Competition 2013. 9 years, 4 months ago -
FiftyEight posted a new activity comment 9 years, 4 months ago
Them legs!!! Good job on the kit!
-
FiftyEight posted a new activity comment 9 years, 4 months ago
Good job on it by the way!!
-
FiftyEight posted a new activity comment 9 years, 4 months ago
That one has many accessories. Can you give me the name of the kit?
-
Good job on it by the way!!
-
Gundam BB-278 Gounetsu Karakurishi (sorry late VERY late reply)
-
It took you 8 months to remember the name? HAHAHA
-
-
-
FiftyEight posted a new activity comment 9 years, 4 months ago
Good job. That’s a great build. I’ve read that wing kits are usually 1 or 2 meters shorter than a regular MS (RX-78-2 at 18 meters). I think the Cosmic Era MS are usually about 18-20 meters if I’m not wrong.
-
FiftyEight posted an update in the group
Beginner Modeler – Modeling Competition 2013. 9 years, 5 months agoFinished product: this is the final submission of an HGUC Char’s Z’Gok. Just a simple OOB build with some marker painting (head missile tubes, monoeye, and hand mega particle cannons), panel lines, some waterslide decals, and semi-gloss top coat.
I’m not sure whether or not this is my final submission. If I don’t post anymore WIP’s, then this is…[Read more]
-
FiftyEight posted an update in the group
Beginner Modeler – Modeling Competition 2013. 9 years, 5 months ago -
FiftyEight posted an update in the group
Beginner Modeler – Modeling Competition 2013. 9 years, 5 months ago -
FiftyEight posted an update in the group
Beginner Modeler – Modeling Competition 2013. 9 years, 5 months ago - Load More
FiftyEight
FiftyEight
Beginner Modeler – Modeling Competition 2013.
